Gypsum Forks
Gypsum handling forks have been specially designed with product protection in mind. The unique blade design and vertical protective upright provides the optimum product protection when handling gypsum wallboard or other similar products.
Urethane pad is rated at 70 Durometer. The hardness of the Urethane pad is similar to that of an automobile tire. Replacement pads are available. The pads are impervious to grease and do not mark the sheet as would other similar materials; it is extremely durable. The 70 Durometer pad is bonded to a steel plate for stability and rigidity. The slide-in feature of the pad makes replacement quick and simple, thus averting any expensive down time.
- Hook or shaft type mountings are available to suit your forklift.
- Bent and Upset heel section
- The blade is polished and all sharp corners removed (preventing damage to gypsum board).
- There is a double sided bevel at the tip for easy entry between gypsum sheets.
- Fork widths are normally up to 12".
- Square corner in heel prevents damage to edge of gypsum sheet
- High back support (if required)
